Alujet Difutape Excellent Nordic Universal- Exterior - Construction tape 60Mm X 25M White

Alujet Difutape-TD1918-Norsk.pdf

ALUJET Difutape is a high-performance adhesive tape that has successfully combined them individual product requirements for all roofing applications in one product. It The special strength of ALUJET Difutape lies in creating airtight and windproof overlapping joints, joints and bindings. This applies to both the inside and the outside of the roof when using vapor barriers, membranes and other suspended ceilings. ALUJET Difutape is designed so that an excellent bond is achieved on all substrates, from smooth (eg films) to slightly rough (eg fleece).

Product benefits: 

• Used internally and externally; extremely high adhesive strength; UV stable for 12 months; water proof; aging-    resistant and solvent-free acrylic adhesive system; 3 months weathering resistance; use in temperatures below zero; can be torn by hand; According to DIN 4108-11.

Area of use: 

• PE-membraner; PA-membraner; PP-membraner; PET-membraner; PU-membraner; kraftpapir; glatt tre; OSB-styret; sponplater *; trefiberplater *; gipsfiberplater og gipsplater; sement fiberplater; elektriske kabler; metall; plast. 

Assembly instructions:

• Remove the ALUJET Difute tape from the paper and attach centrally to the overlap. 
• Tape the bit by bit overlap using ALUJET Difutape. 
• A permanent bond is created by pressing the band down on the substrate. 
• ALUJET Difutape is designed so that an excellent bond is achieved on all surfaces, from smooth (eg films) to slightly coarse (eg fleece, wood). 
• Feedthroughs can be taped using short lengths of tape attached to one another fish scale pattern around the penetration. 
• Start at the lowest point of the penetration and end at the highest point. 
• Joints for skylights must also be taped using ALUJET Difutape. 
• The substrate must be structurally stable and dry, and must be free of dust, grease and any adhesive residue.